The ability of the tile surface to resist wearing away.
American National Standards Institute, a standard development organization.
American Society for Testing and Materials International, a standards development organization. Most manufacturers will have a rating system that is based on or supported by the American Society for Testing & Materials (ASTM). Many times you can find these ratings on the tile sample or in the product catalog. The most common system rates ceramic tile abrasion resistance or the overall durability of the tile. Other ratings might include: scratch resistance, moisture absorption, chemical resistance and breaking strength.
Ceramic tiles are created from natural products extracted from the earth that are shaped into tiles and then fired in kilns at extremely high temperatures.
Ceramic mosaic tile
Tiles having a facial area of less than 9 in². Typically mounted in sheets or strips with other mosaic tiles.
A ceramic surface component, usually relatively thin in relation to facial area, having either a glazed or unglazed face and during manufacturing, fired to a temperature sufficiently high to product specific physical properties and characteristics. The different types of ceramic tiles are as follows: porcelain tile, pressed floor tile, quarry tile, wall tile, and ceramic mosaic tile.
no foot traffic. These tiles are suggested for interior wall applications only and not for the floor.
light traffic. These tiles are suggested for interior wall applications and for residential bathroom flooring only.
light to moderate traffic. These tiles can be used for residential floor and wall applications including bathrooms, kitchens, foyers, dining rooms and family rooms. They’re a good all-around performer.
moderate to heavy traffic. These tiles are recommended for residential, medium commercial and light industrial floor and wall applications including shopping malls, offices, restaurant dining rooms, showrooms and hallways.
heavy/extra heavy traffic. These tiles can be installed anywhere. They will hold up in floor and wall applications at airports, supermarkets and subways.
Most manufacturers will have a rating system that is based on or supported by the American Society for Testing & Materials (ASTM). Many times, you can find these ratings on the tile sample or in the product catalog. One rating system measures Slip Resistance, which is measured by its Coefficient of Friction (COF). The higher the COF the more slip resistant the tile. This is important when selecting a floor tile for areas that get wet, such as your shower or bathroom floor. Other ratings listed by the manufacturer might include: scratch resistance, moisture absorption, chemical resistance and breaking strength.
A ceramic floor tile trim that has two rounded finished edges on the tile to be used to complete a corner.
A tile on which the facial edges have a distinct curvature that results in a slightly recessed joint.
DCOF AcuTest® is a registered TCNA designation for the test procedure contained in ANSI A137.1 Section 9.6., which has been extensively researched, allows for in-situ field measurements, and is in use at tile manufacturing facilities. It was so named to distinguish it from other DCOF measurements using different instruments and/or protocols.
To meet the new DCOF AcuTest® criteria, you cannot use old COF values from C1028 measurements. As the methodology is different, there is no direct correlation from C1028 values to DCOF AcuTest® values.
Small tiles or bits of tile, stone or glass forming an attractive design.
A tile that features decoration on the surface.
A ceramic or stone tile edge with the appearance of an antique or used look.
Tile decorated with colored clays, inlaid and fired.
Extruded tiles are formed by forcing the clay material through a mold for the desired shape versus pressing the tile.
When creating a pattern with different ceramic tiles, the more prominent tile that is throughout the largest areas is called the “field tile”. It is the primary area of tile covering a wall or floor
Kiln- firing ceramic ware before glazing
Subjecting ceramic body and its glaze to one firing operation
The fifth step in the manufacturing of ceramic tile. The tiles are fired in the kiln at temperatures around 2000 degrees Fahrenheit.
A manufacturer-specified ceramic tile (including porcelain) primarily for use on floors, but also suitable for use on walls and countertops, and having a facial are of 9 in² or more.
Part of the fourth step (glazing) in the manufacturing of ceramic tile. The glaze liquid is prepared from a glass derivative called frit and colored dyes. The glaze is applied by either a high-pressure spray or is poured directly onto the tile.
Tile that can be used where freezing and thawing conditions exist; suitable for outdoors.
A tile which has been manufactured to a specific thickness where its thickness largely associated with how it is installed and/ or used. Gauged tiles can be used in wall or floor applications depending on manufacturer’s recommendations.
Glass mosaic tiles
Tile made of glass not exceeding 9 in², usually mounted on sheets.
Glazed ceramic tiles are coated with glass-forming minerals and ceramic stains. Typically, they have a matte, semi-gloss or high-gloss finish. They can offer better stain and moisture resistance than unglazed tile. When you look at a glazed tile from the side you can see 2 layers. The body of the tile, or largest layer, is called the bisque. The top layer is called the glaze. Glazed tiles have a hard non-porous, impermeable surface after firing.
The fourth step in the manufacturing of ceramic tiles. Glazing liquid is prepared from a glass derivative called frit and colored dyes. The glaze is applied by either a high-pressure spray or is poured directly onto the tile.
The third step in the manufacturing of ceramic tile. Here, clay is pressed or formed into a tile shape. These pressed tiles are called green tiles at this stage.
Grout is a type of cement that is used to fill the space and provide support in tile joints. There are two types of grout commonly used in home installations; Portland cement based, and epoxy based. Both grout compounds may have sand added to provide additional strength to the tile joint. Pigment is added to the cement at the job site when the grout is mixed.
A satin surface with little or no gloss.
Method for applying color finishes to tiles before firing in the production process, like the way pages are printed using an inkjet printer. Allows for various resolutions (dots per inch or DPI), multiple images and patterns to be created and repeated. For tiles with structured surfaces, this method of printing is effective for decorating “peaks” and “valleys.”
Tile that have less than .5% moisture absorption. These tiles are frost proof and can be used in exterior areas or on the outside of building facades. You can use these where winter is for real.
International Organization for Standards, a standards development organization.
A detectable change in elevation between the edges of tiles sharing the same grout joint. Lippage may be related to an uneven substrate, excessive tile warpage, and/or installation.
A decorative border primarily for walls.
Marble cut into tile sizes 2 ft. x 2 ft. or less and ¾” or less thick.
An underlayment material, usually in the form of a sheet or trowelable liquid or paste, applied to the substrate prior to tile installation. Common uses of membranes include: isolating substrate cracks from the tile and mortar (crack isolation membranes), waterproofing (waterproof membranes), prevention of sound travel (sound reduction membranes), providing an air space for additional substrate curing after tile installation (uncoupling membranes), or a combination of these properties.
As the density of the tile increases, the amount of moisture that tile can absorb becomes less. Tile density means that, as the weight or the density of the tile increases, it becomes a stronger tile. Tile density and moisture absorption have an indirect relationship to each other. What this means is that as the density of the tile increases the moisture absorption rate becomes less. Tile density and moisture absorption is important for you to understand when selecting tile for different applications.
Ceramic tiles are fired in a kiln at temperatures around 2000 degrees Fahrenheit. Tiles that are fired once after the glaze is applied are called Monocuttura Tile or single fired.
A blend of cement, sand, and additional compounds which may include polymers or other additives to improve adhesion, accommodate movement, and add strength. The primary function of mortar is to adhere tile to a substrate. Tiles can be set in a thick reinforced mortar bed or can be applied directly to a substrate with dry-set mortar, modified dry-set mortar, or improved modified dry-set mortar using the thin-set method.
In addition to ceramic tile styles, manufacturers also offer decorative inserts, medallions and mosaics that are used to create intricate patterns and beautiful borders. Tile size 2”x2” and smaller are usually referred to as mosaics and are often used with different colors to create a pattern or decorative inset. Some of these smaller tiles also come in different shapes, such as hexagon.
Tile assembled into units or sheets to ease installation. May be mounted on the back, edge or face of the tile using mesh, plastic, paper, or glue dots.
Slang for mortar.
Tile is usually referred to by its nominal
size, not its actual size. During the firing process, ceramic tile will shrink, on average, by about 10% in size. For example a 12” by 12” floor tile can measure 11-7/8 inches square. Currently, the most popular ceramic floor tile are the larger sized tiles such as 16”x 16”, 18”x 18” or 24” x 24” sizes.
This is a type of tile that absorbs 7% or more moisture. They are suited for indoor use only.
A tool used to apply mortars, adhesives and liquid membranes to a substrate. Often constructed of rigid metal or plastic with a handle and available in various shaped notches (e.g. “square” notch, “V” notch, “U” notch) and sizes to accommodate different applications.
A general term for floor tile.
A glossy surface achieved through mechanical means.
Porcelain tile is made up of 50% feldspar and is fired at a much higher temperature than regular ceramic tile. This makes porcelain tile much harder and more dense than other tile products. Because of its highly durable make-up, porcelain is more resistant to scratches and can withstand temperature extremes. Also, because porcelain is non-porous, it’s very stain resistant, has very low water absorption ratings (Less than 0.5%) and thus can be used for interior and exterior applications as well as heavy-use and commercial areas. Finally, because porcelain’s color goes all the way through, small scratches or chips are less noticeable.
The third and most common step in the manufacturing of ceramic tile. The clay is pressed or formed into a tile shape. These pressed tiles are called green tiles at this stage.
Glazed or unglazed tile, made by the extrusion process from natural clay or shale.
A tile that has had all edges mechanically finished to achieve a more precise facial dimension.
Method for applying color finishes to tiles to tiles before firing in the production process. Tiles pass under a coated roller and finishes are transferred onto the tile. Rollers may be solid or patterned and can produce repeatable but random designs. On structured tiles, coatings are only applied to the “peaks” with this method.
A stone used where necessary by installers to smooth the rough edges of tile after cutting.
Running bond or Brick joint
Tile installation with each row offset, usually by half its length. Common with subway tiles on wall installations. If the side to be offset is greater than 15 in., a maximum offset of 1/3 is recommended.
There are two types of grout commonly used in home installations; Portland cement based, and epoxy based. Both of these grout compounds may have sand added to provide additional strength to the tile joint. Sanded grout is recommended for tile joints 1/8th of an inch and larger.
Sanitary Cove Base
A ceramic floor tile trim that has a rounded finished top like a bullnose to cover up the body of the tile.
Tiles that absorb from 3% to 7% moisture. They are applicable for indoor use only.
Shade variation is inherent in all fired ceramic products and certain tiles will show greater variation within their dye lots. Shade variation is usually listed on the back label of each sample with a low, moderate, high or random rating.
consistent shade and texture.
moderate shade and texture variation.
high shade and texture variation.
very high shade and texture variation.
A cutting tool for tile. A wheel is used to score the tile in a straight line followed by an application of pressure to either side of the line to create a controlled break.
The process for installing a ceramic floor begins with the preparation of the tile foundation, or what’s called the substrate
. Common materials used as tile substrates in home installations include concrete, plywood, and drywall.
In the past, ceramic tile was installed using what is called the thickset or mud set method. In this method, a thick layer of mortar was applied to a waterproofed and steel reinforced substrate. This provided a strong, flat base onto which the tile was installed. The thickset method is effective, but it’s an involved and labor-intensive process. Today, many tile installers have opted for the industry accepted and more efficient thin set method, where the tile is adhered directly onto a backer board that is nailed to a plywood or concrete substrate using a much thinner layer of mortar.
Slang for gauged tiles with a thickness of 6.5 mm or less
Unglazed tiles that are a solid color all the way through and do not have a top layer of glaze are often referred to as through-body construction. (See Unglazed.)
Tile density means that, as the weight or the density of the tile increases, it becomes a stronger tile. Moisture absorption means that, as the density of the tile increases, the amount of moisture that tile can absorb becomes less. Tile density and moisture absorption have an indirect relationship to each other. What this means is that as the density of the tile increases the moisture absorption rate becomes less. Tile density and moisture absorption is important for you to understand when selecting tile for different applications.
Various shapes of bases, caps, corners, moldings, angles, etc.
Tiles with tumbled, round edges producing an aged, antique appearance.
Unglazed tiles are a solid color all the way through and do not have a top layer of glaze. This is often referred to as through-body construction. They have no additional surface applications and are typically more dense and durable than glazed tile making them more suitable for interior and exterior applications. Unglazed tiles do have good slip resistance, however please note that they do require sealing to help prevent staining. They come in various surface treatments and textures.
There are two types of grout commonly used in home installations; Portland cement based, and epoxy based. Both grout compounds may have sand added to provide additional strength to the tile joint. Unsanded grout is typically used in joints that are smaller than 1/8th of an inch.
Tiles that absorb less than 3% moisture. They are referred to as frost resistant tiles but cannot be used in exterior areas where freeze- thaw conditions could cause tile cracking.
A glazed tile for interior use on walls. These tiles are not typically expected to withstand excessive impact, abrasion, or be subjected to freeze/thaw cycling.
The measured curvature of a tile.
A physical property of tile. An indication of tile porosity from measuring how much water can enter the body of a tile.
A cutting tool for tile. An electric saw typically fixed to a table which most commonly uses a diamond-coated blade to cut the tile while water is applied to cool the blade and reduce dust.